No products found.
Try using fewer filters, or clear all filters.
Product Details
Movement
VK63 - Dream
Patina
Choose your own patina level. We offer all white lume, warm yellow aged lume to our heavy patina featuring our unique tropical rust patina. In order to create this effect, our artisans developed an oxidized patina method that allowed us to control the aging, resulting in the perfect recreation of a time earned patinated dial.
Dimensions
Case diameter:37mm
Case length: 44.0mm
Case thickness: 13.8mm
Lug Width
20mm
Assembly
Each unique piece is hand finished and assembled at our Los Angeles studio.
Domed Crystal
Vintage inspired domed and round sapphire-coated mineral crystal.
Bracelet - Leather Straps
Use only leather straps with curved ends. We have a VRT strap line designed for our VRT chronos.
Vintage Oyster included. We also have a 5 Link Vintage and a Vintage Rivet designed for the VRT.
Water Resistance
Depth 50 meters - 165 feet
One thing that’s important with any watch is that water resistance and heat resistance are really two different things.
We never recommend wearing a watch in warm or hot water — showers, hot tubs, saunas, etc. — regardless of its water-resistance rating. This applies to our watches just as it does to a high-end dive watch from Rolex or any other manufacturer.
The issue is the heat. Watches rely on rubber gaskets and seals around the crown, caseback and crystal to maintain water resistance. Repeated heating and cooling causes those materials to expand and contract, which can accelerate deterioration of the seals and eventually allow moisture into the case. Soap, shampoo and other chemicals can also be hard on those seals.
A watch designed for deep diving may withstand tremendous water pressure, but that doesn't make hot water a good environment for its gaskets. Cold or room-temperature water and hot water put very different stresses on the seals.
For that reason, our recommendation with any watch is simple: swimming in appropriate conditions is one thing, but take the watch off before a hot shower, bath, hot tub or sauna. It’s an easy way to protect the seals and keep the watch water resistant for as long as possible.
Setting Instructions
True North VK63 Setting Instructions
Time Setting
Pull the crown out to the second click.
Turn the crown to set the hour and minute hands.
Make sure AM/PM is correct (the date should change at midnight).
Push the crown back in when finished.Date Setting
Pull the crown out to the first click.
Turn the crown clockwise until the correct date appears.
Push the crown back in.
Important: Do not change the date between 9:00 PM and 3:00 AM, as the date-change mechanism is engaged during this period and damage may occur.Using the Chronograph
Start
•Press the upper pusher (2 o'clock).
Stop
•Press the upper pusher again.
Reset
•After stopping the chronograph, press the lower pusher (4 o'clock) to return all chronograph hands to zero.Understanding the Subdials
•Center Hand: Chronograph (stopwatch) seconds
•9 o'clock: Chronograph minutes (up to 60 minutes)
•6 o'clock: Running seconds (normal timekeeping)
•3 o'clock: 24-hour indicator linked to the main time
Note: The large center seconds hand is not your normal seconds hand. It only operates when the chronograph is running. The small seconds hand at 6 o'clock continuously indicates the current time.
Warranty and Return Policy
WARRANTY & RETURN POLICY
ONE-YEAR INTERNATIONAL WARRANTY
Your watch is covered by a one-year international warranty from True North Watch Co., starting from the date of purchase.
This warranty protects against any defects in materials or workmanship under normal use.
ALL SALES ARE FINAL ON LIMITED EDITION WATCHES
Wind Edition timepieces are produced in strictly limited quantities and are not eligible for returns or refunds.